Shell-and-tube heat exchanger classification

Apr 01, 2026 메시지를 남겨주세요

In shell-and-tube heat exchangers, the temperature difference between the fluids inside and outside the tubes leads to a temperature difference between the shell and the tube bundle. If the temperature difference is large, significant thermal stress will be generated within the heat exchanger, causing the tubes to bend, break, or detach from the tube sheet. Therefore, when the temperature difference between the tube bundle and the shell exceeds 50℃, appropriate compensation measures are required to eliminate or reduce thermal stress. Based on the compensation measures employed, shell-and-tube heat exchangers can be classified into the following main types:

 

① Fixed tube sheet heat exchanger: The tube sheets at both ends of the tube bundle are integrated with the shell. This structure is simple but only suitable for heat exchange operations where the temperature difference between the hot and cold fluids is small and the shell side does not require mechanical cleaning. When the temperature difference is slightly larger and the shell-side pressure is not too high, elastic compensation rings can be installed on the shell to reduce thermal stress.

 

② 플로팅 헤드 열 교환기: 튜브 묶음의 한쪽 끝에 있는 튜브 시트가 자유롭게 떠 있을 수 있어 열 응력이 완전히 제거됩니다. 전체 튜브 다발을 쉘에서 추출할 수 있어 기계적 청소 및 유지보수가 용이합니다. 플로팅 헤드 열교환기는 널리 사용되지만 구조가 상대적으로 복잡하고 비용이 높습니다.

 

③ U-튜브 열교환기: 각 열교환 튜브는 U-자 모양으로 구부러져 있으며 양쪽 끝이 동일한 튜브 시트의 상단과 하단에 고정되어 있으며 튜브 박스 내의 배플에 의해 입구실과 출구실로 분리됩니다. 이러한 유형의 열교환기는 열 응력을 완전히 제거하고 플로팅 헤드 열교환기에 비해 구조가 간단하지만 튜브 측면의 청소가 어렵습니다.

 

④ Vortex 열막 열교환기: Vortex 열막 열교환기는 최신 Vortex 열막 열전달 기술을 활용합니다. 유체 운동 상태를 변경함으로써 열 전달 효과를 증가시킵니다. 매체가 와류관 표면을 통과할 때 관 표면을 강하게 닦아 열 전달 효율을 향상시킵니다. 최대 효율은 10000W/m² 정도에 도달할 수 있습니다. 이 구조는 또한 내식성, 고온 저항, 고압 저항 및 스케일링 방지 기능을 달성합니다. 다른 유형의 열 교환기는 유체 채널에서 고정된- 방향 흐름 패턴을 가지며, 열 교환 튜브 표면 주위에 흐름을 형성하여 대류 열 전달 계수를 감소시킵니다.

문의 보내기

문의 보내기