쉘-및-튜브 열교환기 선택 방법

Apr 06, 2026 메시지를 남겨주세요

The general principle for selecting a shell-and-tube heat exchanger is as follows: When operating at high temperatures and pressures with large throughput, strength and structural reliability are crucial, and a shell-and-tube heat exchanger should be selected. If the operating temperature and pressure are not high, and the throughput is not large, plate or plate-fin heat exchangers can be selected. These types of heat exchangers have significant advantages such as high heat transfer efficiency, compact structure, and low metal content. Additionally, for highly corrosive media, heat exchangers made of corrosion-resistant materials should be selected, such as titanium metal heat exchangers or polytetrafluoroethylene (PTFE) heat exchangers.

In practical applications, shell-and-tube heat exchangers are more commonly used, but they can be further divided into metal shell-and-tube heat exchangers and fluoroplastic shell-and-tube heat exchangers, with slightly different operating conditions.

Metal shell-and-tube heat exchangers: Higher pressure resistance, lower corrosion resistance, can be cleaned later, suitable for higher temperature ranges.

Fluoroplastic shell-and-tube heat exchangers: Lower pressure resistance, excellent corrosion resistance, less prone to scaling and therefore do not require cleaning, only suitable for temperatures below 240℃.

쉘{0}}및-튜브 열 교환기 분류: 산업용 열 교환기는 일반적으로 구조, 열 전달 과정, 열 전달 표면의 소형화, 사용된 재료, 흐름 패턴, 흐름 경로, 유체 상 및 열 전달 메커니즘과 같은 측면에 따라 분류됩니다. 다음은 쉘{3}}및-튜브 열교환기의 관련 분류에 대한 소개입니다.

1. 사용된 재료에 따른 분류: 일반적으로 열교환기는 금속 재료와 비-금속 재료의 두 가지 범주로 나눌 수 있습니다. 비-금속 열교환기에는 주로 세라믹 열교환기, 플라스틱 열교환기, 흑연 열교환기, 유리 열교환기가 포함됩니다.

2. 열전달 표면 특성에 따른 분류: 쉘{1}} 및- 튜브 열교환기 내부의 전열관 표면 형상에 따라 나사식 관 열교환기, 주름관 열교환기, 성형관 열교환기, 표면 다공성 관 열교환기, 나선형 평관 열교환기, 나선형 홈관 열교환기, 환형 홈관 열교환기, 종방향 홈관 열교환기, 핀관 열교환기, 나선형 권선형으로 분류할 수 있습니다. 튜브 열교환기, 핀 튜브 열교환기, 내부 삽입 열교환기, 톱니 모양 튜브 열교환기 등

3. 유체 흐름 패턴에 따른 분류: 쉘-및-튜브 열교환기 내부의 유체 흐름 패턴을 기준으로 평행 흐름, 역{3}}흐름 및 교차{4}}흐름의 세 가지 유형으로 분류할 수 있습니다. 이 세 가지 흐름 패턴 중에서 역-류는 열 교환기 벽에 대한 열 응력이 가장 낮고 동일한 조건에서 벽면 양쪽 유체 간의 온도 차이가 가장 크기 때문에 선호됩니다.. 4. 구조적 특성에 따른 분류: 고정 튜브 시트 유형, 플로팅 헤드 유형, U- 튜브 유형, 스터핑 박스 유형, 슬라이딩 튜브 시트 유형, 이중 튜브 시트 유형, 얇은 튜브 시트 유형 등으로 나눌 수 있습니다. 열교환기의 저압측-압력이 고압측 설계압력의 2/3 미만인 경우, 이러한 사고 상황을 고려해야 하며, 고압측의 유체가 튜브측을 통해 흐르도록 해야 합니다.-

문의 보내기

문의 보내기